Home » You Must Know How To Do Linksys Wifi Extender Setup

You Must Know How To Do Linksys Wifi Extender Setup

by jackmall

Linksys Extender Setup / extender.linksys.com- Guide

Linksys Extender Setup is configure with the web setup page extender.linksys.com. The wifi range extender setup when configure correctly let you start with advanced setting. Nowadays, people use advanced and high-frequency WiFi routers to cover their internet needs.
But In some places, the signal is weak, or no internet in this place. These areas are called dead network spots or areas. Setup Linksys WiFi extender instead of a new router. Linksys extender reduces the installation cost to a third of the router.
Linksys WiFi extender increases the signal strength, so you can enjoy the internet through your home or work. So now the question arises, how to perform Linksys WiFi extender setup. Well, to do that, you have to prepare a few things.
Linksys extender Wifi setup completed using two methods. Before stepping towards that, you need to understand some necessary prerequisites of the Linksys WiFi extender setup.

Setup Linksys extender -extender.linksys.com using WPS Button

Linksys Wifi Extender Setup without ethernet cable – The WPS is Wi-Fi Protected Setup. This button works on one device at a time. The WPS button is on the router’s front or back panel of your Linksys extender. Many routers have no WPS feature.

The main task of the WPS button is that its functions as the network security standard which makes connections with the router and the wireless device faster. Follow the below-mentioned steps:

  1. Ensure that the Linksys WiFi range extender router is connected correctly (extender.linksys.com).
  2. Connect the Linksys WiFi range extender into an electrical switch.
  3. Wait for a few seconds when the power LED on your Linksys WiFi extender turns to solid.
  4. So press the WPS button present at the back or side panel of the device.
  5. Important Note: When you setup Linksys WiFi extender without visiting extender.linksys.com, ensure that your home WiFi router and wireless extender are in the same place.
How to open Linksys wifi Extender Setup – extender.linksys.com page

To perform Linksys wifi Extender Setup via wireless protected setup (WPS) method, follow the below-mentioned steps:

  1. Ensure that your home Linksys WiFi extender setup (extender.linksys.com) is set up correctly.
  2. So now, plug in your Linksys extender into an electrical power switch.
  3. Wait until the power LED on your Linksys WiFi extender turns to solid amber.
  4. Press the WPS button present at the back or side panel of the device.

Important Note: While configuring your Linksys WiFi Extender without visiting Linksys.com, ensure both your home Wi-Fi router and wireless extender are in the same room.

How to Setup Linksys WiFi extender By Using Extender.linksys.com?

Linksys wifi Extender Setup can be done through offline page Extender.Linksys.com, or Extender.Linksys.Setup. But one has to understand that these pages are Extender.Linksys.com and Extender.Linksys.Setup can’t be accessed in online mode.

So you can also set up Linksys wifi Extender Setup using www.extenderlinksyssetup.com

Steps to be followed are:-

  1. Firstly, Plug in your Linksys extender to a power outlet.
  2. Now for setup, type http://extender.linksys.com or in the address bar.
  3. If the Linksys extender setup page doesn’t come up, change the browser.
  4. On the setup page, Because it will ask you how you would like to configure Linksys Extender.
  5. Hit Linksys wifi Range extender option or Access point according to your need.
  6. Select the WiFi network which you want to extend.
  7. So follow the online instructions and your setup will be completed.
  8. Lastly, the After Setup Successful Connection page will close automatically.
  9. Plug the extender using the Spot finder so that you will get fast internet with maximum Signal Strength.
How to Configure linksys extender setup page with wps

You can do your Linksys Extender Setup with any WPS compatible Router or by going on Linksys Offline page ( Linksys extender or extender.linksys.com).

  • First of all, Find the WPS button on the router (Depends on the router to router), it’s on the backside of the Router.
  • Secondly, Press WPS on the router as well as within 2 minutes press it on the Linksys Extender.
  • As a result WPS light get solid on the successful Connection with the router and your setup is complete.
  • Please make sure the WPS button was enabled on the router setting.

NOTE:- Moreover, For confirmation connect your Smartphone, computer or Tablet with the New Wi-Fi ending with _EXT.

How the linksys extender setup wireless signals work?

Linksys WiFi extender (extender.linksys.com) is used to increase the strength of the wireless signal from the router to the device coverage area. Another way it is a device that increases the signal strength where there is minimum signal strength.

  1. Set up the Range extender and realize how to introduce Linksys wifi extender
  2. Find the PUSH button on the linksys extender.
  3. Press the catch to associate the linksys extender to the switch.
  4. Utilize the Spot Finder to put the gadget appropriately.
  5. Inevitably, associate it to the extended home Wi-Fi organization.

Web browser linksys extender setup – extender.linksys.com

  1. Open the web browser and enter the setup page of the extender. Type http://REx0000-xxxx for the Windows OS or http://RE6x0000-xxx.local for the Mac operating system.
  2. Xxxx define the last three characters of the extender Mac address. Click the Start button in Windows. select the File Explorer. Select the Network button on the screen and click on it.
  3. So now See the device webpage by linksys range extender symbol. Because you can now seen the user name and password option screen. Type admin in both search boxes and the password is changed if required.
  4. Access the web-based setup page. If setting is complete, click the Administration option and select Factory Settings.
  5. Reset the factory settings to complete the configuration. The Linksys wifi extender turn off now for a few seconds.
The Linksys wifi range extender setup with the USB cable
  1. Connect the PC to the Ethernet port of your Linksys wifi Range extender with Ethernet cable (extender.linksys.com).
  2. Plug your Linksys wifi range extender into the electrical plug and check the LED light is not blink.
  3. Open any internet browser and enter your ping address or IP address in the location bar.
  4. A username and password window will be shown.
  5. Try not to fill the user name, fill only the password by entering admin in the password field and afterward click the Log in.
  6. Presently click the alternatives Wireless-> Basic wifi settings.
  7. Set your radio catch to Manual and afterward enter your switch’s Network Name(SSID).
  8. Click on Wireless Security area, pick the security settings that match your switch’s design.
  9. Type the Password or WEP key and afterward click the choice Save Settings.
  10. Dispose of the force links of the switch and your reach extender for 60 seconds. Plug in your switch first. Trust that the light will be steady on your switch and the module the reach extender.
Orange Light Blinking Linksys extender Setup

The Linksys extender has an orange light located in the front side of the device that give a signal the power is ON. If light is blinking Orange that means the router is malfunctioning. The solutions to resolve the issue are given below.

  1. Reboot the gadget to determine the issue. This is done by withdrawing the force link from the printer’s back.
  2. Forgo continuing for some time and afterward replug it to the force connector.
  3. In the event that the orange light gleams, it is important to overhaul the firmware.
  4. Download the new firmware.
  5. Turn off the gadget from the Internet association
  6. Interface the machine to the Internet.
  7. Attempt to interface your framework to the Internet.
  8. In the wake of downloading the updates, dispatch the record, and go through the directions to refresh the gadget’s firmware.

You can setup a Linksys extender setup without a computer. When you setup your Linksys extender, you can use your smartphone. Use an Android device or iPhone that is Wi-Fi enabled, and follow the steps given below.

  1. First of all, connect your Linksys extender to the ability source.
  2. Wait for the facility light to begin flashing in green colour.
  3. Open the choice of WI-Fi setting on your smartphone then start looking for the Wi-Fi name extender setup.
  4. Once it gets connected, launch a web browser on your smartphone and enter the net address Extender.linksys.com within the location bar.
  5. After planning to the extender setup page, perform the instructions appearing on the screen. Then, select the house Wi-Fi network that you just want for your extender.
  6. Disconnect the extender then connect it within the Wi-Fi range of your router.

Now your Extender Linksys Setup is done now and you can finally use it.

You may also like

Leave a Comment