Home » Hints: how to pick your most reasonable fin tube heat exchanger?

Hints: how to pick your most reasonable fin tube heat exchanger?

by aoliverjames
Heat exchanger manufacturer


Fin tube heat exchanger is a sort of heat trade hardware utilized in gas and fluid heat exchangers. It accomplishes the reason for upgrading heat move by adding fins to the common base tube. The fin tube heat exchanger is one of the soonest and best disclosures during the time spent further developing tube heat move. This technique is as yet the most broadly utilized strategy among all tube heat move surface improvement strategies. It isn’t just appropriate for single-fin tube heat exchangers, which are broadly utilized in power, substance, petrochemical, air-molding designing and refrigeration designing. 

Design of fin tube heat exchanger 


The fundamental heat move component of the fin tube heat exchanger is a finned tube, a finned tube mountain base tube and a fin blend. Finned tubes The base tube is typically a round tube, however there are likewise oval tubes and level tubes. The surface design of the fins incorporates level fins, intruded on fins, layered fins and punctured fins. The baseline can be steel pipe; treated steel pipe; copper pipe, and so on The fin can likewise be made of steel belt; treated steel belt, copper belt, aluminum belt, and so on The fin tube heat exchanger is a gadget wherein air is utilized as the heat trade medium, and the temperature is moved starting with one item then onto the next. 


There are two kinds of steam heat exchangers, heating air and cooling air. The heat trade process is isolated into two phases. To begin with, the heating or cooling medium heats or cools the encompassing air under the activity of the finned tube, and the heated or cooled air moves the heat to different items to accomplish the motivation behind heating and cooling. For example, drying room drying and air cooling framework. It is the fundamental gear in the hot air gadget. The heat medium utilized in the fin tube heat exchanger can be steam or boiling water, or heat move oil. The functioning strain of steam is for the most part not more than 0.8Mpa, and the temperature of hot air is below 150°C. 


1. Grouped by structure 


From the primary kind, the finned tube can be isolated into two fundamental sorts: longitudinal and outspread. Different sorts are the turn of events and misshape Ning of these two kinds. For instance, the enormous twisting point fin tube is near the longitudinal heading, and the little winding point fin tube is near the outspread. The states of the fins are round, rectangular and slender molded. What’s more, the fin can be set up external to the tube, called an external finned tube; it can likewise be organized inside the tube, called an inward fin tube or both. 


2. Grouped by assembling process 


As indicated by the assembling system, finned tubes can be characterized into necessary finned tubes, welded finned tubes, high-recurrence welded finned tubes and precisely associated finned tubes. 


  • The indispensable fin tube is made by projecting, machining or rolling, and the fin and the tube are an entirety. 


  •  Welding finned tubes, utilizing brazing or dormant gas protected welding and different cycles to fabricate. Current welding innovation can interface fins of various materials together, and can simplify finned tubes and conservative, with great heat move and mechanical properties, and has been generally utilized. Since the buildup in the welding crease isn’t helpful for heat move and may even cause crack, the nature of the welding system should be guaranteed when creating such finned tubes. 


  • High-recurrence welding of finned tubes utilizes high-recurrence electric acceptance created by a high-recurrence generator to produce high temperature at the contact point between the tube surface and the fins. 


  • Soften the two in the left and right profundity reach, and afterward compress to interface the fin and the tube overall. No motion, no patch, straightforward assembling, high efficiency, great heat move and mechanical properties. This is the best sort of finned tube, which is being perceived and taken on by most clients. 


  • The finned tubes are precisely associated, ordinarily in three kinds: winding sort, trimmed sort, sleeve type or string type. Heat exchanger manufacturer  The winding fin tube is easy to produce. The metal band is fixed toward one side of the tube by mechanical or welding technique, and the metal belt is firmly twisted on the external mass of the tube by the tube revolution force, and the opposite end is fixed to shape an injury fin tube. The material of the winding sheet can be copper strip, steel strip or aluminum strip.


You may also like

Leave a Comment